SCHNEIDER ELECTRIC-Schneider Electric Conext XW+ Conduit Box
NOTE: This item is included with the XW+ PDP (Power Distribution Panel).
The XW+ Conduit Box is a bare conduit box (no wires) that can be used to create systems with two or more XW+ inverters or to retrofit XW+ Inverters into existing systems which may already have AC/DC disconnects.
5 year warranty
The XW Conduit Box mounts directly to the bottom of an inverter/charger to safely protect end-users from inadvertent contact with wiring or connections. It comes bundled with the XW Power Distribution Panel and the XW Connection Kit; however, it is also is available separately for systems larger than two inverters, or to retrofit inverters into existing systems which may already have AC/DC disconnects.
The Conduit Box is easily secured with two screws provided on the bottom of the inverter. The bottom flange of the conduit box can then be attached (fasteners not provided) to the wall to complete the installation. The front panel of the conduit box can be removed by removing the two screws on the front, allowing ample space to make all necessary wire connections. In multi-unit installations, the sides of adjacent conduit boxes can be removed to create an effective raceway with lots of volume to run AC and DC inverter cabling. The conduit box also includes multiple cable strap points, allowing the final installation to look clean and professional. In addition, an internal sheet metal barrier is included to keep communications wires separate from AC and DC power wires.
|Shipping Weight||10.0 lbs.|
Schneider Electric Conext XW Connection Kit
Schneider Electric Conext™ XW Connection Kit INV 2 INV 3 PDP
The Schneider Electric XW Connection Kit for a second inverter (part number 865-1020) is the extension kit required for connecting a second or third XW Inverter/Charger in the XW Power Distribution Panel (PDP).
- XW Conduit Box
- Three 60 A, 120/240 Vac, two-pole, Square-D, Type QOU, Din-Rail
- mountable, AC breakers Custom designed bypass interlock plate
- #6 AWG AC wiring to connect the inverter to the AC breakers
- Four power distribution bus bars (replaces factory-installed bars) One GJ250A
- 160 Vdc, 3/8” stud DC breaker
- One bus bar for DC positive
- One pair #4/0 AWG battery cables
- AC Sync and Xanbus™ cables
This Product does not include Tax and shipping costs.International shipping is subject to regulations and Import Taxation of Country of destination
Tel: (+506) 7037-8077 or Toll Free: 1(800) 2130227
Solar Systems in United States & Latin America