APsystems MICROINVERTER
APsystems MICROINVERTER QS1 (4 MODULE HIGH POWER INVERTER)
APsystems QS1, a four-module, high-power microinverter for residential applications.
A new design for APsystems, the QS1 offers 300% faster installation time, while offering the highest peak output power and up to 3X faster transmission speed than conventional microinverters. A wider MPPT voltage range will result in a greater energy harvest for homeowners. The first of its kind, the QS1 is designed to accommodate today’s high output PV panels, offer enhanced capability and significantly reduce installation time and costs while providing an unprecedented level of power with four independent MPPT per channel.
Common AC trunk cabling with the dual-module YC600, offers flexible mix-and-match compatibility on the same circuit and with the same gateway (ECU-R or ECU-C). The unit also builds on the successful APsystems line of multi-module microinverters, offering reduced logistics costs and integrated communication and connection features.
-
Quad microinverter with independent MPPT
-
300% faster installation than conventional microinverters
-
Highest peak power output of 300W per channel
-
Wider MPPT voltage range for greater energy harvest
-
Accommodates PV panels up to 375W
-
2.4GHz ZigBee mesh network (3X faster than PLC)
-
Common AC trunk cable w/ YC600; flexible, mix-and-match compatibility
With its groundbreaking design and features, the YC600 is the pinnacle of microinverter technology. A single-phase, smart grid-compliant microinverter, the YC600 serves two modules with dual, independent MPPT. Zigbee wireless communication over a mesh network offers faster data speeds than PLC and a wider MPPT voltage range results in a greater energy harvest for homeowners. A true utility-interactive microinverter with Reactive Power Control (RPC) technology, the YC600 meets CA Rule 21 requirements and is inherently NEC 2014/2017 Rapid Shutdown compliant. The unit also builds on the successful APsystems line of multi-module microinverters, simplifying installation and reducing logistics costs.
- Dual-module microinverter with independent MPPT
- Utility-interactive with Reactive Power Control (RPC)
- CA Rule 21 compliant
- Continuous power of 274VA per channel, 300VA peak
- Accommodates modules from 250-410W+
- Wide MPPT voltage range (22V-45V)
- Meets NEC 2014/2017 690.12 Rapid Shutdown requirements
- ZigBee communication & free monitoring
APsystems-YC500A Microinverters
APsystems flagship microinverter converts the DC power from the solar module to the proper AC current for your power grid. The APS YC500A handles two solar modules simultaneously (dual MPPT), and is designed to operate in challenging real-world conditions from -40 F to 149 F.
- Maximum Power Output: 500W (from two solar modules)
- Individual MPPT for each panel
- Fully compatible with the Itek Energy solar module (240w)
- Peak Efficiency: 95.5%
- Dimensions: 8.6″ (220mm) x 5.4″ (160mm) x 1.37″ (29mm)
- Weight: 5.5 lbs. (2.5kg)
- 25 year warranty
- Up to 14 solar modules (7x YC500s) in a string with a 20A breaker
Our flagship product, the APsystems YC500A is a grid-tied microinverter with intelligent networking and monitoring systems to ensure maximum efficiency. Highly dependable and cost effective, the YC500A handles up to 310W modules with negligible clipping, delivering 250W AC per module with dual MPPT. Half the inverters and half the installation means real cost savings for residential and commercial customers.
INPUT DATA (DC)
Model | YC500A |
Series | YC500 |
Manufacturer | APsystems |
Mechanical
Type | Grid Tie - Micro Inverter |
Operating Temperature Range | -40°F to +185°F (-40°C to +85°C) |
Enclosure | Outdoor - NEMA 6 |
Cooling | Natural Convection - No fans |
Connectors | MC4 |
AC Bus (trunk cable) | 12 AWG |
Dimensions (W x H x D) | 8.75" x 6.5" x 1.1" |
Weight | 5.5 lbs |
Shipping Method | Ground |
Input (DC)
MPPT Voltage Range | 22 - 45V |
Maximum Input Voltage | 55V |
Maximum Input Current | 12A X 2 |
Output (AC)
Rated Output Power | 500W |
Maximum Output Voltage | 208 V | 240 V |
Maximum Continuous Output Power | 208 V: 500W | 240 V: 500W |
Maximum Output Current | 208 V: 2.08A | 240 V: 2.4A |
Nominal Output Frequency | 60Hz |
Maximum Units Per Branch | 208 V: 6 for 20A Breaker | 240 V: 7 for 20A Breaker |
Features
- Single unit connects two solar modules
- Maximum output power 500W
- Individual MPPT for each module
- Up to 14 solar module (7x YC500s) in a string with a 20A breaker
Detailed Description
The APsystems YC500A is a grid-tied microinverter with intelligent networking and monitoring systems to ensure maximum efficiency. Highly dependable and cost effective, the YC500A can accommodate PV modules up to 365W with dual MPPT but is ideally suited for modules from 280 to 310W. Half the inverters and half the installation means real cost savings for residential and commercial customers.
APsystems-YC500i MicroinvertersAPSYSTEMS YC500I 548W DUAL MICROINVERTER WITH ENERGYMAX
Model: YC500i
The YC500i by APsystems is a dual microinverter made for grid-tie solar systems that require smart networking and dynamic monitoring. Each microinverter can handle up to two solar panels with minimum clipping delivering a maximum combined output of 548W. The EnergyMax feature allows you to use the YC500i microinverter with high output 72-cell solar panels.
You will only need one microinverter for every two panels, maximizing efficiency, savings and installation cost. Each unit has dual MPPT performing independently for each panel. You can have up to 14 solar panels, or 7 YC500i dual microinverters, in one branch circuit connected directly to your electric distribution panel using a 20A 240V 2-Pole circuit breaker. The APsystems YC500i microinverter comes with a standard 10-year warranty, extendable to 25 years.
- Power Output: 548W (two solar modules combined)
- Two individual MPPT channels
- 95.5% Peak Efficiency
- Dimensions: 8.6 x 5.4 x 1.37in (220 x 160 x 29mm)
- Weight: 5.5 lbs (2.5kg)
- Up to 14 solar modules (7x YC500i) in a string with a 20A breaker
- 10 year standard warranty
- MPPT Voltage Range: 22-45V
- Operation Voltage Range: 16-52V
- Maximum Input Current: 12A x 2
APsystems-YC1000-3-208 Microinverter
The world’s first true 3-phase (no phase balancing) microinverter is also available in a 208V configuration, also with 900 watts AC maximum output, ZigBee communication and an integrated ground. Up to four YC1000-3-208 units (16 modules total, 60- or 72-cell) can be installed on a single 15A circuit.
This groundbreaking technology is only available from APsystems.
- 1130w AC output
- 3 phase output (no phase balancing)
- 208V
- ZigBee
- 4 units / string (up to 16 PV modules)
- Weight: 8.8 lbs. (4kg)
- 10 and 25 year warranties available
APSystems YC1000-3 208V 900W Commercial Microinverter
Single unit connects up to four PV modules
900W AC output
120Y/208V OR 277Y/480V
ZAigBee wireless communication and monitoring
Up to 44 solar modules (60 or 72 cell) can be linked on a three-pole 15A breaker
10-Year Standard Warranty ( extendable to 25 years)
The YC1000 is the industry's first true 3-phase ( phase balanced & phase monitored) solar microinverter, handling commercial grid voltage of 120Y/208V or 277Y/480V with 900 watts AC minimum output, ZigBee communication and an integrated ground. Each YC1000 supports up to 4PV modules.