Discover Batteries-Dry Cell AGM Commercial Transit Battery/Transit Batteries
Discover Batteries-Dry Cell AGM Commercial Transit Battery/Transit Batteries
  • Load image into Gallery viewer, Discover Batteries-Dry Cell AGM Commercial Transit Battery/Transit Batteries
  • Load image into Gallery viewer, Discover Batteries-Dry Cell AGM Commercial Transit Battery/Transit Batteries

Discover Batteries-Dry Cell AGM Commercial Transit Battery/Transit Batteries

Vendor
DISCOVER BATTERIES
Regular price
$3,692.00
Sale price
$3,692.00
Regular price
$3,692.00
Sold out
Unit price
per 
Tax included. Shipping calculated at checkout.


DRY CELL AGM COMMERCIAL TRANSIT BATTERIES/TRANSIT BATTERIERS

 Discover® DRY CELL Commercial Rail/Transit batteries outperform traditional flooded, AGM, and gel deep cycle batteries and are a resilient battery solution for diesel engine, commercial rail, and transit applications. DRY CELL Commercial Rail/Transit batteries exceed passenger transport safety standards, tolerate vibration and a wide ambient temperature range. DRY CELL Commercial Rail/Transit batteries support long duration current draws and deliver high cranking performance. DRY CELL Commercial Rail/Transit batteries are trusted by the world’s most reputable commercial vehicle, rail, bus and tram organizations.

FEATURES

HYDRO POLYMER

  • Organic capillary separator technology saturated with hydro polymer electrolytes delivers extra electrolyte volume
  • Resists dry-out and prevents thermal runaway
  • Maintains performance characteristics over operational life
  • Absorbed Glass Mat Dry Cell technology. No free-flowing electrolyte

ENHANCED ALLOYS

  • Thick plate construction with graphite enhanced plate alloys deliver maximum runtime over operational life

CARBON BOOST

  • Carbon additives increase duty cycle performance, battery charge acceptance and Partial State of Charge operation

AUTOMATED THROUGH-THE-PARTITION WELD

  • Key industry models have improved product consistency and quality. Less wasted lead than manual welding process
  • Supports high-current loads and lowers Internal Resistance

POLYPROPYLENE CASE

  • Key industry models Support high heat resistance and durability
  • Pressure relief valves with low open / close tolerance reduce water loss and extend cycle life
  • Integrated flame arrestors prevent fire and explosion

BENEFITS

ENHANCED RUNTIME

  • High Amp Hour capacity
  • High operational voltage over lifetime
  • 80% DoD to 1.9 VPC

EXTENDED SERVICE LIFE

  • Long life superior to flooded lead-acid / GEL / AGM deep-cycle batteries
  • 550+ cycles 70% DoD (IEC 254-1 Traction Lead-Acid)

RESILIENCE

  • Partial Stage of Charge operation superior to AGM
  • Intense duty cycling superior to GEL / AGM
  • Over-charge / discharge resilience superior to AGM

EXTREME TEMPERATURES

  • High temperature life superior to AGM
  • Low temperature operation superior to flooded lead-acid / GEL / AGM batteries

EXTREME VIBRATION RESISTANCE

  • Vibration resistance superior to GEL / AGM
  • Vibration shock tested IEC 61373, DIN EN 61373, SAE J537

HL3 V0 FLAME RETARDANT CASE

  • Fire and smoke protection tested. Safe for use in passenger transport (DIN EN 45545-2)

RELIABLE AND SAFE

  • Valve regulated lead-acid Dry Cell
  • Maintenance-free
  • Nonspillable. No-gas
  • Safe for environmentally sensitive areas
  • Spark and explosion tested (SAE J1495)

CERTIFIED QUALITY

Discover® manufacturing facilities are fully certified to ISO 9001/14001 and OSHA 18001 standards.

Designed in accordance with and published in compliance with applicable standards, including:

  • IEC 60254-1. Lead-Acid Traction
  • DIN 43 539. VRLA
  • SAE J537. Storage
  • DIN EN 45545-2 (02/2016) - Fire Protection on Railway Vehicles and DIN EN ISO 5659-2 (03/2013)
  • IEC 61373-2010, DIN EN 61373-2011. Long-Life Random Vibration, Shock, Functional Vibration
  • UL, CE Health Safety Certified

SHIPPING CLASSIFICATION

  • Classified as a nonspillable battery
  • Without restriction for transport by Sea (IMDG amendment 27)
  • Without restriction for transport by Air (IATA/ICAO provision 67)
  • Without restriction for transport by Ground (STB, DOT-CFR-HMR49)

NOTES

IUI with Pulse Termination algorithm uses a pulse termination criterion. As a safety precaution during the Finish phase, if the average cell voltage, or volts per cell (vpc), exceeds U31 and the charger output has been on for more than 30 seconds, the output is shut off until the vpc falls to U32. The finish phase then resumes and this “pulsing” continues until the target overcharge (108% - 112%) is reached.

Please note the voltage settings displayed in the IUI with Pulse Termination Charge Profile graph, corresponds to the set points at 25°C (77°F). For temperatures below 25°C, adjust +0.005VPC/°C (or 0.003VPC per ˚F). For temperatures above 25°C, adjust -0.005VPC/°C (or 0.003VPC per ˚F).

MECHANICAL SPECIFICATIONS

Industry Reference BCI: GC6 DIN
Length A (in/mm) 9.6 244
Width B (in/mm) 7.4 189
Height C (in/mm) 10.0 254
Total Height D (in/mm) 10.8 275
Weight (lbs/kgs) 70.6 32.0
Terminal * SAE
Technology VRLA Non-spill

NOTE: There is a tolerance of +/-2% in dimensions. Weights may vary

ELECTRICAL SPECIFICATIONS

Voltage (V) 6
Internal Resistance (mΩ) 1.6
Short Circuit (A) (20°C / 68°F) 3700
Self-Discharge (20°C / 68°F) 2-3% per month
Charge Temperature Min: -10°C (14°F) | Max: 50°C (122°F)
Discharge Temperature Min: -40°C (-40°F) | Max: 50°C (122°F)
Storage Temperature Min: -20°C (-4°F) | Max: 60°C (140°F)

CAUTION: Extra considerations must be given to depths of discharge, operating voltages and currents when designing systems for use at maximum temperatures.

PERFORMANCE SPECIFICATIONS

Amp Hours (AH)
5 HR 10 HR 20 HR
205 215 235

5 HR: 1.75VPC; 10 HR: 1.80VPC; 20 HR: 1.80VPC. All at 30°C/86°F

Minutes of Discharge
@25A @75A
495 140
Cranking Amps
Cranking Amps (0°C/32°F) 880
Cold Cranking Amps (-18°C/0°F) 735

CRANKING AMPS: Cranking Amps data is provided as a reference only. Specific application sizing and life factors must be considered when using deep cycle product in a starting application.

 

 

AMRtechnologies Inc. Solar & Electrical Systems
Tel: (+506) 7037-8077 or Toll Free: 1(800) 2130227
Solar Systems in United States & Latin America
www.AMRtechsolar.com