Due to global supply chain constraints lead times for shipments may be delayed. We are actively working with our suppliers to mitigate shortages and improve lead times. If you have questions, please contact your AMRtechnologiesInc. representative at 1-800-213-0227 or submit your question AMRtechsolar@gmail.com
Outback Grid-Tie w/ Battery Backup System for 12 Mission Solar 60 Cell Modules
This kit provides all the main components you'll need to install your own 3.9kW grid-tied solar power system with battery backup:
- 2100Wh capacity per battery
- 3000 cycles each @ 50% depth of discharge
- Super-fast charging - Can go from 50% to 90% state of charge in under an hour
- Lower upfront and lower overall cost per kWh cycle than other lead acid batteries
- Pure lead carbon chemistry offers greater cycle life in partial state-of-charge (PSoC) conditions
- Sealed-cell and maintenance-free (no watering), and low self-discharge rate
OutBack FLEXmax 80 MPPT Charge Controller - for safely charging your batteries and protecting them from overcharging.
- Advanced continuous MPPT (Maximum Power Point Tracking) algorithm
- Increases PV output as much as 30%
- Works with 12-60VDC battery banks
- Automatically detects battery voltage on startup
- Operates at full maximum current rating in ambient temperatures up to 104°F (40°C)
OutBack Radian GS4048A Hybrid Inverter/Charger - functions primarily as a grid-tie inverter, but provides backup power from the batteries when the grid goes down.
- Grid-interactive and grid-independent functionality in a single unit
- 4kW continuous output
- Stackable design allows future upgrading to a system as large as 12kW
- 120/240VAC split phase voltage
- Dual AC inputs (i.e. grid + generator)
- GridZero technology optimizes the balance between power sources to minimize dependence on the grid and allow you to get the most out of your solar panels
- Field-adjustable input/output voltage and frequency boundaries
OutBack Radian GS4048A Hybrid Inverter/Charger - functions primarily as a grid-tie inverter, but provides backup power from the batteries when the grid goes down.
- Grid-interactive and grid-independent functionality in a single unit
- 4kW continuous output
- Stackable design allows future upgrading to a system as large as 12kW
- 120/240VAC split phase voltage
- Dual AC inputs (i.e. grid + generator)
- GridZero technology optimizes the balance between power sources to minimize dependence on the grid and allow you to get the most out of your solar panels
- Field-adjustable input/output voltage and frequency boundaries
- Balance of system components - breakers, surge protector, cables, and labels.
- All required schematics needed for installation.
Note that every solar system installation is unique and you will likely need to purchase some parts/materials separately in order to meet the exact requirements of your project and local regulations.
This 3.9kW Grid-Tie Solar Power Kit with Battery Backup Includes:
Solar Panels + Mounting Hardware
- 12x Trina 330W black-on-black monocrystalline solar PV modules (or similar)
- 1x 30' MC4 connector cable
- 2x 50' MC4 connector cables
- 1x 100' MC4 connector cable
- 1x MC4 connector cable disconnect key
- 20x cable clips
- 1x Midnite Solar MNPV6 Combiner Box
- 1x 300V surge protection device
- 4x ½" strain relief - 2 round holes/locknuts
- 1x ½" strain relief - 1 round hole/locknut
- 4x 20-amp din rail mount breakers
- 8x IronRidge XR100 PV Mounting Rail 11' lengths (clear)
- 4x IronRidge XR100 Rail BOSS Splices
- 4x pairs of IronRidge XR100 Rail End Caps
- 28x IronRidge XR Rail Universal Fastening Objects
- 8x IronRidge XR Stopper Sleeves
- 2x IronRidge XR Rail Grounding Lugs with hardware
- 20x IronRidge FlashFoot2 Roof Flashing
- 20x IronRidge Square Bolt Bonding Hardware for roof flashings
Inverter/Charger + Load Center
- 1x OutBack Radian GS4048A Inverter/Charger
- 1x OutBack FLEXmax 80 MPPT Charge Controller
- 1x OutBack MATE3S System Display and Controller
- 1x OutBack GSLC Pre-Wired Load Center with 175A disconnect, AC breakers, and DC breakers
- 1x bracket for side-mounting the FLEXmax 80 to the GSLC
- 1x bracket for side-mounting the MATE3S to the GSLC
- 1x OutBack HUB-4 System Communication Manager
Deep-Cycle Battery Storage
- 8x KiloVault 12V, 2100Wh Advanced AGM Deep-Cycle Batteries
- 1x KiloVault 48V Battery Balancer
- 1x pair of 10' long 2/0 battery-to-inverter cables
- 1x pair of 2' long 2/0 battery interconnect cables
System Label Stickers
- 4x NEC label: "Electric Shock Hazard"
- 5x NEC label: "Photovoltaic Power Source"
- 1x NEC label: "Maximum Voltage, Maximum Current"
- 1x NEC label: "Photovoltaic DC Disconnect"
- 1x NEC label: "Inverter AC rating"
- 1x NEC label: "Photovoltaic AC Disconnect"
- 1x NEC label: "Warning: Electric Shock"
- 3x NEC label: "Turn Off PV Before Working"
- 3x NEC label: "System AC Disconnect"
- 2x NEC label: "Main PV System Disconnect"
- 2x NEC label: "Warning: Dual Power Source"
- 1x NEC label: "Rapid Shutdown Switch" (2017)
- 1x NEC label: "Rapid Shutdown Switch" (2014)
- 1x NEC label: "Warning: Power Source Output"
Specifications
Solar Panel Specs (each)
- 66.54" H x 39.21" W x 1.38" D
- 39.7 lbs
- 60 monocrystalline cells (120 half-cut cells)
- STC efficiency: 19.6%
- Nominal power: 330W
- Tolerance:+0-5W
- Nominal voltage: 20V
- Open circuit voltage: 40.6V
- Short circuit current: 10.4A
- Maximum system voltage: 1000V
- Connectors: MC4 compatible
- Manufacturer: Trina Solar
- Model number: TSM-DD06M.05-330BK
- Kit contains: 12
Charge Controller Specs
- 16.25" H x 5.75" W x 4.5" D
- 12.2 lbs
- Peak efficiency: 98.44%
- Maximum battery charging current: 80A
- Battery voltage range: 12V - 60V
- Maximum open circuit voltage: 150V
- Manufacturer: OutBack Power
- Model number: FM80-150VDC
- Kit contains: 1
Inverter Specs
- 16" W x 28" H x 8.7" D
- 82 lbs
- Input AC voltage: 85 - 140VDC
- Input DC voltage: 40 - 64VDC (48V nominal)
- Continuous power: 4000W
- Surge rating (5 seconds): 6000W
- Output voltage: 120/240VAC
- Output frequency: 60 Hz
- Max battery charging current: 57.5A
- Weighted/peak efficiency: 92.5% / 93%
- Manufacturer: OutBack Power
- Model number: GS4048A-01
- Kit contains: 1
Battery Specs (each)
- 22" L x 4.92" W x 12.6" H
- 127 lbs
- Voltage: 12V
- Energy: 2.16 kWh
- Capacity: 180Ah (20-hour rate)
- Max discharge current: 500A (5 seconds)
- Max charge current: 140A (100A recommended)
- Max configuration: Up to four 48V strings in parallel (16 total batteries)
- Terminals: Top terminal M8 insert, front terminal M6 adapter
- Manufacturer: KiloVault
- Model number: 2100 PLC
- Kit contains: 8
This Product does not include Tax and shipping costs. International shipping is subject to regulations and Import Taxation of Country of destination.
AMRtechnologies Inc. Solar & Electrical Systems
Tel: (+506) 7037-8077 or Toll Free: 1(800) 2130227
Solar Systems in United States & Latin America
www.AMRtechsolar.com
English
French
German
Italian
Russian
Spanish