LORENTZ PUMPS-PuSOLAR POWER SUBMERSIBLE WATER PUMPS

 Solar Powered Submersible Water Pumps

LORENTZ-PS150C Submersible Solar Pump 20m Head

                                             

Lorentz PS150C - Submersible Solar Pump - 20m Head
Max. total dynamic head	20m
Max. flow rate	4,000 litres/hour
Solar Operation
Max. power voltage (Vmp)	> 17V DC
Open circuit voltage (Voc)	max. 50V DC
Nominal voltage	12-24V DC
Battery Operation
Nominal voltage	12 or 24 V DC
General
Pump type	Centrifugal pump
Controller dimensions (mm)	207(W) x 352(H) x 124(D)
Controller net weight	5.6kg

 

LORENTZ-PS2-150-AHR-07S-X

    Lorentz-PS2-150-AHR-07S

• Max. 60m Head

• Flow Rate 1400 ltr/hr

• Max. 300W Power Output

• 18V - 50V DC Solar Input Range

• Max. DC Solar Output Current 22A

• 98% Efficient

• IP68

• Water Temperature Max. 50ºC (Type 4)

• Bore hole minimum diameter 3.5" (89mm)

• Control inputs for dry running protection, remote control etc.

• Protected against reverse polarity, overload and overtemperature

• Integrated MPPT (Maximum Power Point Tracking)

• Battery Operation Capable with Integrated low voltage disconnect

Bundle Includes

Helical Rotor Pump End, EC Drive Motor & Pump MPPT Solar Controller Unit. (visit our Pump Accessories page for optional extras)

Features

• Engineered in Germany with Australian Support & Servicing
• Water temperature specific variants to provide the most efficient outputs
• High quality non corrodible materials used throughout
• Solar direct connect with AC connection options
• MPPT technology to maximise power use from PV modules
• ECDRIVE DC brushless motors, designed for solar, with over 90% efficiency
• Inbuilt data logger with wireless access
• Multi LED display for simple operation
• Multiple analog and digital inputs and outputs for ultimate connectivity

Benefits

• Long life expectancy and proven in service record

• Designed for use in remote and harsh conditions

• Smart modular design for simple and cost effective servicing and repair

• Highest efficiency, pumps more water than the competition, starts earlier in the day and finishes later

• Fast and simple installation

• Cost effective spare parts philosophy

• Large range of pumps to closely match each application and optimise efficiency

• Simple configuration, diagnostics and performance data via free

LORENTZ PumpScanner Android App
Technical Specifications

• Max. 60m Head
• Flow Rate 1400 ltr/hr
• Max. 300W Power Output
• 18V - 50V DC Solar Input Range
• Max. DC Solar Output Current 22A
• 98% Efficient
• IP68
• Water Temperature Max. 50ºC (Type 4)
• Bore hole minimum diameter 3.5" (89mm)
• Control inputs for dry running protection, remote control etc.
• Protected against reverse polarity, overload and overtemperature
• Integrated MPPT (Maximum Power Point Tracking)
• Battery Operation Capable with Integrated low voltage disconnect

LORENTZ-PS2-100 100W SOLAR POWER PUMP

 

General description

• High efficiency solar powered water pumping system.
• Submersible helical rotor pump and high efficiency DC brushless motor.
• Plugged connections for customer self install.
• Replaceable cables for long life.
• Multiple pump ends to match local pumping requirements (HR07/14/23).
• Maximum 30m / 98ft head and 3.1m3/h / 13.6 gall/min flow rate.

Dimentions & weights pump unit

• Length: 407 mm.
• Width (diameter): 88 mm.
• Weight: 8Kg.

Controller

• Height: 29 mm.
• Length: 102 mm.
• Width: 120 mm.
• Weight: 700g.

Material Pump unit

• Motor cast stainless steel.
• Rotor solid stainless steel.
• Stator housing polyphenylene sulfide with glass fill.
• Water filled motor.

Controller

• Aluminum housing.
• Fully resin encapsulated.

Technical data

• Maximum voltage: 55VDC.
• Max. ambient temperature: 55°C.

Usability

• LED indication of operational status on Controller.
• Simple on/off switch to control pumping.

Equipment Included

• Controller with inputs for PV, pump, run dry protection and tank full float switch.
• Motor with socket.
• Helical rotor pump.
• Motor cable with plug (15m / 49.2ft).
• Bracket for controller mounting under PV module.
• Solar input to MC4 converter cable.

Optional

• Dry run float switch with cable.
• Float switch for tanks with cable.

 LORENTZ-PS600C Submersible Solar Pump 30m Head

The PS600-C series is a maintenance-free solar bore pump with a flow rate of up to 11,500 litres per hour. The pump system is typically powered by three solar panels (e.g. Trina Honey Module). Designed for min. 100mm (4 inch) wells.

The centrifugal rotor pump (with brushless DC motor) comes with a UL approved, programmable controller (IP68), housing all electronics and a data module with Bluetooth connection.

A PS600 centrifugal pump delivers about 11,500 litres per hour @ 5 metres head (or 4,000L @ 30m).

Lorentz Submersible Pumps-Certugal

LORENTZ PS centrifugal pumps are highly efficient pumps with a flow rate of up to 79,000 litres / hour. Designed for drinking water supply, livestock watering, pond management and irrigation applications.

Each system consists of a pump, pump motor and a controller. All electronics are kept above ground for simple access and servicing. The addition of a low level water probe is recommended (sold separately).

Benefits

• Long life expectancy and proven in service record
• Designed for use in remote and harsh conditions
• Smart modular design for simple and cost effective servicing and repair
• Water filled motors for reliability and to avoid oil contamination
• Fast and simple installation
• Cost effective spare parts philosophy
• Very strong ROI against diesel powered pumping reducing production costs and reducing carbon footprint
• Large range of pumps to closely match each application and optimise efficiency

Features

• Engineered in Germany
• High quality non corrodible materials used throughout
• Cast stainless steel components
• Solar direct connect with AC connection options
• MPPT technology to maximise power use from PV modules
• ECDRIVE DC brushless motors, designed for solar, with over 90% efficiency
• Data logger
• IP65 protection class (controller)
• Overload, reverse polarity, over temperature protection (controller)

 Lorentz PS150HR-Submersible Solar Pump - 60m Head

 The PS150-HR series is a maintenance-free solar bore pump with a flow rate of up to 1,300 litres per hour - powered by a single solar panel (e.g. Trina Honey Module). Designed for min. 100mm (4 inch) wells.

The helical rotor pump (with brushless DC motor) comes with a UL approved, programmable controller (IP68), housing all electronics and a data module with Bluetooth connection.

A PS150 helical pump delivers about 1,300 litres per hour @ 10 metres head (or 1000L @ 50m)